Additional Images


- C25/C26
The system includes a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering. A 3-piece differential relocation system is utilized to correct front pinion angle with the center differential brace tying front and rear crossmembers together for a sturdy differential mount. This coupled with the differential skid plate and crossmember brace create an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance.

To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are a pair of CV spacers, brake line brackets, sway bar relocation, and all the necessary hardware to complete the install.

To lift the rear and level the stance a 5" flat block is utilized along with longer u-bolts, brake line bracket and your choice of hydro or nitro shocks.

New for 2014-16 is the availability of both forged steel and forged aluminum control arms from the factory. Zone Offroad Products offers kits to fit both steel and aluminum arm equipped trucks. Check your vehicle before ordering to ensure the correct kit is shipped. Accessories for this lift kit include Zone front skid plate available separately.
Pricing: $1,195.95


Quick Specs

Front Lift Height: 6.5
Front Lift Method: Spacer
Rear Lift Height: 5
Rear Lift Method: Block Kit
Install Time Hrs: 8
Difficulty Level 1-5: 4
Wheel Size: 17x9
Back Spacing: 5″
Max Tire Size: 35 x 12.50
Wheel Size: 18x9
Back Spacing: 5″ - 5.25″
Max Tire Size: 35 x 12.50
Wheel Size: 20x9
Back Spacing: 5.75″
Max Tire Size: 35 x 12.50


FMVSS No.126 (ESC system test) Compliant
Over 98% Made in the USA - not a cheap import
Ductile Iron, CNC machined steering knuckles maintain OE steering and ball joint geometry and allow fitment of 17" wheels
Heavy duty boxed one piece crossmembers that maintain a clean look
Differential skid plate and support strut included for off-road protection
Multi-point differential mounting system corrects drive line angles
Weld-in control arm pocket plate included
Rear solid cast iron blocks vs. fabricated blocks
Works with factory Stabilitrak System
Available with Zone Offroad Hydraulic or Nitro shocks


All wheel drive models require drive line modification
Frame bracket modification and minor welding required
To reduce trimming required 20" wheels with 5-3/4" backspacing recommended
Add-a-leaf option recommend for crew cab models for a more level stance (Part # C6159)
Will not fit models equipped with magnetic ride control.
Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference

Required Vehicle/Kit Selections
Vehicle Type/Specs
Steel Control Arms (Kit #C25)
Aluminum Control Arms (Kit #C26)


Shipping Information

  • Item Requires Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.